Waterway Poly Storm 4" (100mm+)

The Poly Storm Jet series is made up of two parts, the jet Body and the jet Front (Also known as a Jet Internal)

Poly Storm Jet Bodies - This is the part that fits through the spa shelll and makes the connection to the spas plumbing. Hole Size required is 2-5/8"

Poly Storm Jet Fronts - Otherwise known as Jet internals, this is the part of the jet thats on show and allows control of the water flow. These are available in many different colours, finishes and massage types. The Jet fronts are also made up of two main components the front escustcheon part and the rear white diffuser part, all of the Poly Storm jets use the same diffuser.

Replacement / Identification

If you have a Poly Storm Jet the rear white part of the jet (The Diffuser) will have a Part number stampted on it 218-4000. If you have a different number and it matches one of the below click on the number to be taken to the correct area of our website.

Note - the Poly Storm range of jet fronts comes in two escutcheon diamters 3-3/8" (this page) and a Large Face version 4" (see here) while the two versions will fit your jet body your spa shell may not allow the Large Face version to fit the recess in the shell mouling - allways replace like for like

Cluster Storm diffuser part number  (218-5140) 
Mini Storm diffuser part number  (218-6930) 
Power Storm diffuser part number  (218-6610)

If you are unsure in any way please contact us to check - or read our help articles here

Helpful Artical:
Waterway Jets Overview

Need help? Ask us a question

The Poly Storm Jet series is made up of two parts, the jet Body and the jet Front (Also known as a Jet Internal)

Poly Storm Jet Bodies - This is the part that fits through the spa shelll and makes the connection to the spas plumbing. Hole Size required is 2-5/8"

Poly Storm Jet Fronts - Otherwise known as Jet internals, this is the part of the jet thats on show and allows control of the water flow. These are available in many different colours, finishes and massage types. The Jet fronts are also made up of two main components the front escustcheon part and the rear white diffuser part, all of the Poly Storm jets use the same diffuser.

Replacement / Identification

If you have a Poly Storm Jet the rear white part of the jet (The Diffuser) will have a Part number stampted on it 218-4000. If you have a different number and it matches one of the below click on the number to be taken to the correct area of our website.

Note - the Poly Storm range of jet fronts comes in two escutcheon diamters 3-3/8" (this page) and a Large Face version 4" (see here) while the two versions will fit your jet body your spa shell may not allow the Large Face version to fit the recess in the shell mouling - allways replace like for like

Cluster Storm diffuser part number  (218-5140) 
Mini Storm diffuser part number  (218-6930) 
Power Storm diffuser part number  (218-6610)

If you are unsure in any way please contact us to check - or read our help articles here

Helpful Artical:
Waterway Jets Overview

Need help? Ask us a question

Refine by

Active Filters

Sort by
Spares Available
Spares Available