Pure-Spa Hot Tub System Flush.
Specially formulated to clean inside the plumbing system of your Hot Tub
Hot tub pipe-work can accumulate an amazing amount of unhygienic matter such as body oils, general grime and biofilm that build up over time.
Use Pure-spa Hot Tub system flush at every water change for a cleaner fresher system
Available in two sizes 500ml & 5 Litre
Hot Tub plumbing systems must be cleaned regularly to help remove the unseen build up of bathing deposits, body fats, & dirt.
Regular flushing helps to prevent the formation of biofilm which is a breeding ground for undesirable bacteria. Pure-Spa Hot Tub System Flush should be used every time the Hot Tub water needs replacing.
1. Remove the filter cartridges from your Hot Tub
2. Prior to draining your hot tub: add approx 1/2 bottle (250ml) of Pure Spa Hot Tub System Flush to the warm water.
3. Close the air controls and run the pump/jet system for 20 - 40 mins.
4. Leave the treated hot tub run on low speed for 12 hours or overnight if possible.
5. Drain the tub & wipe interior surfaces.
6. Reinstall the cleaned filters, refill and balance water.
The pure spa hot tub system flush does exactly what the people at pure-spa say it does. No point me re-writing what has already been said before, it works and I'm going large this time with 5 ltr Save money and get the same great product thar really works. Thanks Pure Spa
Used this product as part of a drain and sanitize procedure. I was amazed at the amount of grease/oil that it removed from the internal Hot Tub plumbing. The grease/grime accumulates on the Hot tub surface at water line level. It then requires a bit of elbow grease to remove. But the results of using this product were clearly visible.