10% OFF this Easter Weekend - Use code EGG10 (min spend £50) 

FAST UK DELIVERY
Secure Shopping
Fully Stocked UK Warehouse
Hassle Free Returns
Trusted by The Trade
Friendly Knowledgable Team
20 Years Established
Click & Collect
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Tecmark Pressure Switch - 4755P

Adjustable PSI

Extended 1 Year Warranty

In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. This can be arranged at the point of purchase or within a limited time afterwards.
An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. You will benefit from free repairs for the term of the warranty period & If your equipment can't be repaired then we will replace it free of charge.(A delivery surcharge may apply for non UK mainland addresses)
This warranty and the standard manufacturer’s warranty does not cover general wear and tear, abuse or misuse or incorrect installation.
If you would like any further information on our extended warranty scheme please call our Hydrospares team on 01326 371 488 OR email us at info@hydrospares.co.uk

LID: 3467
Tecmark
Adjustable PSI
Replaces Len Gordon 800122
Replacement Part
6715
Special Order ItemLead time to be confirmed
Contact for lead time
Fast UK Delivery
Tecmark Pressure Switch - 4755P
£26.18
RRP £32.72

This pressure switch is manufactured by Tecmark and labled with part numbers 4755P. Suitable replacement for Len Gordon 800122. Same as 5756P with less amp rating

These switches convert a pressure signal to an electrical output in response to a change in pressure and movement of an elastomeric diaphragm which opens and closes an electrical circuit based on a set pressure. 3 spade connections allow either a simple on/off configuration or the extra connection point can be used to toggle a dual speed application.
Usually mounted in the heater tube, it can also be found in the plumbing leading to the heater. The unit is extremely easy to replace, but it is advisable to drain the spa to prevent water damage through spraying of water onto the circuit board as this switch may be found inside the control box.

  • Up to 277vac
  • 16A resistive can be used with a heater for example
  • 4A, 1HP inductive @ 250vac (eg motor/pump)
  • PSI adjustable
  • 1/8" MPT (Male BSP) thread.

The unit is extremely easy to replace, but it is advisable to drain the spa to prevent water damage through spraying of water onto the circuit board as this switch may be found inside the control box.

More Info

Summary

  • Up to 277vac
  • 16A resistive can be used with a heater for example
  • 4A, 1HP inductive @ 250vac (eg motor/pump)
  • PSI adjustable
  • 1/8" MPT (Male BSP) thread.

Important Information:
Our ranges must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.

Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support

Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE