AIR SPA D.I.Y KIT
Convert your bath into a luxury hydrotherapy spa bath.
Air Spa systems create a relaxing bubbly sensation from the touch of a button!
Small chrome Air Spa jets release streams of tiny air bubbles from the base of the bath.
(Not to be confused with a Whirlpool which pumps water around the sides of the bath)

ITT Hydro Air - 8 Jet Chrome Air Spa System
Suitable for the competent D.I.Yer,  this self fit Air Spa system is designed to be quick and easy to fit.
WILL FIT TO ALMOST ANY NEW OR EXISTING ACRYLIC BATH
This kit contains 8 x high quality Air Spa jets in polished chrome, these are designed to fit in the base of the bath and release the air bubbles up through your bath water.
The controls are simple yet effective.A slim low profile pneumatic On/Off switch in a polished chrome finish provides control to operate the blower .
The low noise, non heated blower is discreet and offers exceptional performance and comes with a manufacturers warranty.
Any electrical connections must be carried out by a qualified electrician in accordance with the current IEE and building regulations - An RCD must be fitted.

CONTENTS

• 8 x easy to install Air Jets complete with manifolds (chrome)
• 1 Perseus 360W Air Blower, non heated, whisper quiet running,
• 2m  cable,
• Air switch with unions
• On-Off pneumatic button
• 1m 32mm pipe
• 8m Jet pipe
• 1m pneumatic tube
• Check valve
• All the necessary fittings

You will need to supply...............
Drill - Electric or battery with speed control preferably.
4mm drill bit (for the Pilot hole) and a 12mm tile cutter in order to make the 8 holes in the base of your bath!
OR a 12mm hole saw
32mm Hole saw for the On/Off control
Small amount of Glue - Solvent Cement

There are currently no reviews for this product.

Be the first the write a review.