Hot Tub & Spa - Circuit Boards - PCB
A wide range of spares for all the major branded PCB's which are suitable for all major branded hot tubs and spas.
A selection of Balboa Expander board that sits on top of the heater, this allows an extra pump to be fitted to the...
A range of Balboa PCB's that are best suited to the Elite, M1 and M3 series. These are generic boards. If you are replacing...
In this section you will find a range of genuine Balboa replacement for boards that are best suited to the GS...
A range of Balboa PCB's that are best suited to the Value,Duplex and Leader series. These are generic boards....
Selection of genuine replacement PCB circuit board from Spa Quip / Davey. Made in Australia and is for the...
Gecko generic boards that will work on ALL MSPA packs that have been sold in Europe. As these boards are...
A selection of HydroQuip PCB's replacements for HydroQuip Spas.
Need Help? Ask us a question
Genuine SpaForm replacement (Licenced by Balboa) Compatible with; Aegean, Hydropool, Canadian Spa, Cataline,...
Selection of genuine replacement PCB circuit boards from Vita Spas.
Transformers, fuse holders and circuit boards are readily available for all our Electronic Systems and Controls. Electronic control systems consist of a printed circuit board inside the spa control box.
Wires going into the terminals can work loose due to the pump's vibration, damaging the board. To remedy this, try silicoting screws in the terminal block. If the relays are malfunctioning or board is burnt on front or the back, you will need a replacement PCB.
Helpful Aricals:
Identifying a Balboa PCB
Need Help? Ask us a question
There are no products in this section, try removing a few of the filters above.
15:30 cut off 
