Sticker - BOARD SF50 SPAFORM LT LDR CE
Chip - SF50R1F1 20150529
This circuit board is a genuine SpaForm replacement (Licenced by Balboa) for boards labeled 52078 fitted to Balboa/SpaForm SF50 spa control packs.
The PCB should be fitted with all the dip switch settings the same as the faulty PCB being replaced. For correct installation, the PCB should be fitted by a qualified tradesman or electrician.
Circ Pump: Optional (J6)
Pump 1: Single or dual speed
Pump 2: Single (or dual speed with no blower) (J10)
Pump 3: N/A
Air Blower: Yes
Light: 12 volt or 230 volt
Sensor style: Pre M7 2-prong harness
Pressure Switch: Yes
Compatible with; Aegean, Hydropool, Canadian Spa, Cataline, Hydrospa, Leisurerite, Spaform and M3 control boxes. The 52078 PCB does work with the VL range of topside controls including the VL801D and VL701S.
Our range of PCB's must be installed by a competent individual or tradesman, that is trained within the industry. PCB's and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the board is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct PCB as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
PCBS - Non refundable (unless faulty)
*Please ensure you take care to select the correct PCB for your application, as all PCBs are non-refundable items - If you are unsure, please contact our friendly customer service team and we will do our best to give you the information we have available in order for you to be able to make the correct purchase (we cannot be held liable for any incorrect items purchased)
Note: All equipment must be installed by a competent individual or trades person, in accordance with the relevant electrical & building safety regulations. Installing an incompatible PCB may result in damage to it, and other system components, which is not covered by warranty.
PCB's and other sensitive electrical equipment cannot be returned if the sealed packaging has been opened, tampered with or if the item has been fitted.
If a PCB board is suspected of being faulty, it will need to be returned to us within the warranty period so it can be returned to the manufacturer for inspection & testing. If the item is deemed to be faulty, we will repair or replace it under warranty. If the board is not at fault or is found to have been damaged due to incorrect installation or misuse then the warranty will be void and an additional charge will be made to cover the costs of return shipping.
There are currently no questions for this product.