FAST UK DELIVERY
Secure Shopping
Fully Stocked UK Warehouse
Hassle Free Returns
Trusted by The Trade
Friendly Knowledgable Team
20 Years Established
Click & Collect
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Pleatco Cartridge Filter - PMS10 - 159 x 203

Replaces: PMS10, FC-3820, C-6610

Extended 1 Year Warranty

In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. This can be arranged at the point of purchase or within a limited time afterwards.
An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. You will benefit from free repairs for the term of the warranty period & If your equipment can't be repaired then we will replace it free of charge.(A delivery surcharge may apply for non UK mainland addresses)
This warranty and the standard manufacturer’s warranty does not cover general wear and tear, abuse or misuse or incorrect installation.
If you would like any further information on our extended warranty scheme please call our Hydrospares team on 01326 371 488 OR email us at info@hydrospares.co.uk

LID: 377
10 Sq Ft
Reemay
Replacement Filter
FIL-3173P
PMS10
Last 1 availableDue to be discontinued soon
Fast UK Delivery
Pleatco Cartridge Filter - PMS10 - 159 x 203
£15.92
RRP £22.74

The Worlds Most Powerful High Performance Cartridge Filters.

Every Pleatco filter uses ADVANCE filter media which has the highest fiber count per unit to maximises filtration offering greater dirt holding capacity leaving your water clean and clear! Combine this filtration with the FREE FLOW COREŽ for low pressure and higher flow rates you can be assured that your pump is working with less wear and tear.

Please note that the threaded spigots used on Pleatco filters are removable and reusable! They click into position on the filters. Therefore, yours might still be in the filter housing of your spa after removing your filter. This is a great feature and great news if you have accidently ordered the incorrect thread pattern.

PLEASE NOTE: Pleatco are no longer supplying to the UK. We have some stock remaining, but these are limited. We do have a wide range of suitable alternatives available.

Part Numbers
Replaces Filters by Filbur, Unicel
Pleatco Ref PMS10
Filbur Ref FC-3820
Unicel Ref C-6610
Other Ref A3810, FE-90
Attributes
Filter Length 203 mm
Filter Top Hole
Filter Bottom Hole
Hole Diameter 67 mm
Filtration Area 10 sq.ft
Announcement
Discontinued item 1
More Info

Maintaining your Filter Cartridge 

Pleatco Filters are season long and designed to keep your hot tub water crystal clear for up to twelve months when used in conjunction with a proper maintenance regime. Our recommendation is as follows:

  •             Check your spa manual for the manufacturers instructions on how to remove your filter.
  •             Clean the filter every two weeks.
  •             Removal of physical debris should be done using water pressure either from a hose or a specialised cartridge cleaning tool.
  •             Pleatco filters are compatible with proprietary cleaning products or no-foaming degreasers such as dishwasher detergent - They should be left to soak for a minimum of one hour (preferably overnight). We recommend using a cleaning powder like Pure-Spa Powder Filter Cleaner
  •             Before refitting the cartridge, always rinse thoroughly and if possible, allow to dry.


Rotation Method

For best results Pleatco recommend using two cartridges in rotation, with one in service in the hot tub and one on standby. This will allow you to leave the out of service filter soaking in detergent for 24 to 48 hours, thoroughly removing any residues from it, and give it ample time to dry out fully before being refitted. Allowing the filter to fully dry will improve its performance upon being refitted. 


Another filter looks like it will fit my hot tub, will it work?

It is true that often a filter which is 5 to 10mm bigger, either in height or diameter will fit into the receiver of your hot tub, and many people choose to do this, either because their own filter is difficult to source or gone out of production, or because it offers a significant cost saving. First consideration is usually the 'top' of the cartridge. If your cartridge has a closed top, then you cannot use a cartridge with a hole in it, as water will simply go down the hole and bypass the cartridge. If the top is identical and the bottom thread is identical, then providing the square footage of the cartridge is within ten to fifteen percent of your original (and it fits in your spa) then it is unlikely to have any detrimental effect. It is possible to starve pumps of water or cause them to work unnecessarily hard by using filters which are significantly out of specification and this may cause damage to your hot tub.

Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE