This heater unit has a in built hi-limit reset switch, psi sensor and cable with a 2 pin JST style connector. This cable connects to the PCB in the hot tubs spa pack.
These heaters can replace failed Rooster units , but may require a plumbing alteration
IMPORTANT: Ensure when installing that there is adequate water flow to generate back pressure for the sensor.
|Model||H30-R1 + Switch Cable|
|MPN||H30-R1 + Switch Cable|
|Integrated in Spa Pack||Yes|
|Sensor Type(s)||Pressure Switch - Flow, Hi Limit - Probe, Temperature - Probe|
|Length (includes tails)||340 mm|
|Voltage / Hz||230V - 50/60Hz|
|Element Length||6.75" (170mm)|
|Compatible Spa Pack||Other|
Top Tip: 1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual inside diameter of a heater connection is as follows.
There are currently no questions for this product.