EMG electric motors are the motor of choice for both Waterway & Aqua-Flo's European pump ranges.
EMG motors incorporate features such as top mounted electrical connection boxes, stainless steel rotating armatures and sealed bearings. The rear mounted cooling fans and finned motor bodies allow the motor to effectively dissipate heat for cooler running.
Available in the 2 most common hot tub pump wet end frame sizes, you will find that they will almost any failed motor on the market. We commonly sell these motors as upgraded replacements for failed smooth body American style motors.
The best way to match a motor is to look at the detailed spec below, match the frame size and get the amp rating(s) as close as you can.
Type (Tipo): 80-2/4
RPM (Giri): 2820-1440
Amp: 7.6/6.8 A - 2.1/1.9 A
Capactiors : 14uF & 16uF
Note: Motors are supplied without power cables. Re-using your existing cable ensures you will have the correct plug type for your spa pack. Please see Images (attached with the listing) for the capacitors details.
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||7.6 / 2.1 A|
|Power - P1||1.1 kW|
|RPM||2780 / 1390|
|Cord / Plug Type||N/A|
|Frame Size||48F - 92mm|
Great products with next day delivery! motor was a perfect replacement for my Spaform Deck Tub. Seal kit was fitted as a precaution, again perfect! Both items were very easy to fit. For quality, service and information I can't recommend Hydrospares enough!!!!!!
Excellent product arrived promptly, fitted perfectly. Tip, as well as retaining the cable from the old motor don't forget to keep the electrical bridge for the two neutral supplies to the winding's, the new motor doesn't have one and my tub only supplies a single neutral ! Now what did I do with that old motor??
There are currently no questions for this product.