EMG 80-2 Electric Motor - 2.00Hp 1 Speed - 48F
EMG electric motors are the motor of choice for both Waterway & Aqua-Flo's European pump ranges.
EMG motors incorporate features such as top mounted electrical connection boxes, stainless steel rotating armatures and sealed bearings. The rear mounted cooling fans and finned motor bodies allow the motor to effectively dissipate heat for cooler running.
Available in the 2 most common hot tub pump wet end frame sizes, you will find that they will almost any failed motor on the market. We commonly sell these motors as upgraded replacements for failed smooth body American style motors.
The best way to match a motor is to look at the detailed spec below, match the frame size and get the amp rating(s) as close as you can.
Type (Tipo): 80/2
RPM (Giri): 2820
kW: 1.38/1.40 (dependent on volt)
Amp: 8.7/8.3 (dependent on volt)
Capacitor : 30µF
Motors are supplied without power cables. Re-using your existing cable ensures you will have the correct plug type for your spa pack.
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||8.3 A|
|Power - P1||1.88 kW|
|Cord / Plug Type||Bare Wire|
|Spare Parts Available||No|
|Frame Size||48F - 92mm|
There are currently no questions for this product.