EMG electric motors are the motor of choice for both Waterway & Aqua-Flo's European pump ranges.
EMG motors incorporate features such as top mounted electrical connection boxes, stainless steel rotating armatures and sealed bearings. The rear mounted cooling fans and finned motor bodies allow the motor to effectively dissipate heat for cooler running.
Available in the 2 most common hot tub pump wet end frame sizes, you will find that they will almost any failed motor on the market. We commonly sell these motors as upgraded replacements for failed smooth body American style motors.
The best way to match a motor is to look at the detailed spec below, match the frame size and get the amp rating(s) as close as you can.
Type (Tipo): 80/2-4
RPM (Giri): 2850-1440
kW: 1.48/0.44 (dependent on volt)
Amp: 6.8/2.2 (dependent on volt)
Motors are supplied without power cables. Re-using your existing cable ensures you will have the correct plug type for your spa pack.
|Frame Size||48F - 92mm|
the motor has only been in week , but is much quieter than the old one very happy with all the parts supplied by you , but lets see how long this motor lasts the old one was 14 years old and only the centrifugal switch was worn out!
I have a broken pumpmotor in my spa, type 80-2. (see picture) can You tell me if this type EMG 80-2 is the same size/type and will fit into the pumpunit, size from axe etc. Or maybe you can give me an better alternative, If it is the same one, i would like to order it, can you send it to Holland as well? Kind regards Peter van Honschoten, Oude Karselaan 71 1182CN Amstelveen The Netherlands