The Waterway range of Executive pumps are designed especially for hot tubs and spas.
Hi-performance Waterway wet ends are driven by quality E.M.G motors that by design, dissipate heat quicker and give lower running temperatures.
A commonly used pump that serves as a booster pump to deliver a high volume of water through jets in hot tubs and swim spas.
The larger 56 frame pumps use a more robust heavy duty motor and are favoured by spa manufactures for this. Always check you have enough space to fit one if you intend replacing a 48 frame pump.
This pump is fitted with the less common 2.5" suction, meaning a greater up take of water is drawn into the pump.
Waterway pumps are great alternatives to more expensive brands as well. Their wet end shape and dimensions mean they can replace most hot tub pumps out there from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
The Executive pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.
|Dimensions L x W x H||430x200x240mm|
|Type||1 Speed - Boost|
|MPN||PF-20-1N22X25 PF201N22X25 3711221-13|
|HEAD - H max||17m|
|FLOW - Q max||200gpm|
|Configuration||Center Suction, Side Discharge|
|Connection Diameter||79mm x 93mm|
|Thread Type||Male - Buttress|
|Impeller Part No.||310-4190|
|Impeller Vane Gap||12mm|
|Impeller Dot Colour||Blue|
|Shaft Seal Type||PS-1000|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
There are currently no questions for this product.