OEM wet end for the Aqua-flo Flo-Master XP2e hot tub pump range. Fits 2.0" unions.
The XP2e wet end replaces older XP2 versions and can fitted to 1 or 2 speed motors.
This wet end will fit the European spec Aqua-flo pumps with Sirem motors or older Emerson motors that have a 56F 6.1" mount pattern (102mm). They will not fit the more common type 56F mount pattern (104mm). Please check image above for measuring reference before ordering.
Packing will show Hp at 60Hz Spec(3hp @ 60Hz = 2Hp @ 50Hz)
Top Tip: 1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
|Wet End HP||2.0Hp|
|Frame Size||56F (6.1" Euro Legs))|
|Union Connection Ref||2.00 Inch|
|Configuration||Center Suction, Side Discharge|
|Thread Type||Male - Buttress|
|Impeller Part No.||91695200|
|Impeller Vane Gap||10mm|
|Impeller Dot Colour||Blue + Silver|
|Shaft Seal Type||PS-200|
|Spare Parts Available||Yes - See Spare Parts Tab|
Product packaging will show the Hp rating at the 60Hz Specification
3Hp @ 60Hz = 2Hp @ 50Hz
Useful Part numbers
There are currently no questions for this product.