A 2" glue in straight fitting with integrated air bleed screw. Once mounted into plumbing this allows for effective bleeding of the system to help prime your equipment fore start up
This fitting would normally be mounted just after the pump discharge where an air trap could cause the pump difficulty to prime. Other places you may have to bleed your system would be a inline cartridge filter. The air bleed fitting should be installed in the highest part of that plumbing section.
This is a Spigot x Socket Fitting (Male x Female)
Should you need further advise or assistance please contact us for help
Test fit your plumbing first (dry fit) before final gluing. Best to use a plumbing cleaner first then solvent cement.
There are currently no questions for this product.