Note. This is not the best product for glueing flexible pipe - use PeviCol or WDF-05 if gluing flexible pipe work.
Cut pipe clean & square. Remove any burrs and file a lead chamfer of approx 3mm at 15º. Roughen the mating surfaces with a medium grade emery cloth.
Clean the abraded surfaces.
Solvent cement must not be stirred. Using a clean, flat brush apply an even layer of cement to both surfaces.
Immediately push the spigot into the socket. Hold the joint for 10 seconds and wipe away all excess. Joints should not be
disturbed for 10 minutes, after which they may be handled with care. Full cure will be 24 hours
There are currently no questions for this product.