Rated voltage: 230V, 50/60Hz, single phase
Rated power: 3680W
Rated current: 16A (The outlets A, B and C can individually be loaded with up to max 3680W @ 16A each. However the total sum of the loads must not exceed the rated power and current.)
Output Connection: 3
Control Connections: 1 Use with HydroAir touch pads or LED buttons.
Waterproof rating: IXP5
Water Level Connection: Yes JST Plug (25-0211-5)
This control box allows on/off operation of 3 x pieces of equipment, i.e pumps blowers or lights. The Classic Line control box series can be used to replace older HydroAir single, double or triple command units without the touchpad quick connection, A.K.A system 500 Electronic Standard systems. If your system is a quick connection box (prefixed 22-xxxx) then you must also replace the touch pad.
See downloads for user instruction and settings.
Classic line box additional options
By moving a set of jumpers you can use the box for water inlet or water level control.
2, 3 & 4 FUNCTION:
Via the jumper setting choose automatic dry-out of air system if relevant.
Use special PIC for single touch control. e.g. a blower and a light with only one LED button. The possibilities are almost endless.
3 & 4 FUNCTION:
Intergrated RF module for remote control unit (25-2604).
NEW! We can now offer a remote control for this control box:
The control boxes are designed for our Round and Oval touches and our LED buttons. However a built-in RF (radio frequency) module allows you to control the 3 and 4 functions boxes with an elegant remote control, which of course is waterproof and can float. Remote Control
Hi i have question.Do you have remote control for this control box?If you havit instock i wil buy this control box with remote control.Thank you.