IMPORTANT NOTE - THIS PUMP REPLACES MODEL 3612KEP
The Koller Compact pump series are compact and quiet single speed pumps. Smaller in overall dimensions than the Basic series and fitted with the compact wet ends. They are great for fitting into tighter than normal spaces and usually little or no plumbing alterations are required.
Koller pumps are more commonly used on whirlpool baths but can be found on some European and Chinese hot tubs.
Can be operated via your normal top side control or via an air button connected to the built-in pneumatic switch. Suitable for use as circulation pump or as a boost pump on a jet circuit of 6-8 jets.
Self Drain pumps draw water via the inlet situated at the bottom of the wet end front face. They will drain Via this connection to, back into the bath and down the plug hole..
An additional feature to these pumps is the C-Profile mount system which integrates with the Koller Quick Fix Vario supports
Unions sold seperatly.
|Dimensions L x W x H||300x??x??mm|
|Voltage / Frequency||220-240V / 50Hz|
|Power - P1||0.80 kW|
|Cord / Plug Type||Bare Wire|
|Union Connection Ref||1.50 Inch|
|Configuration||Low Suction, Center Discharge|
|Thread Type||Male - Buttress|
|Spare Parts Available||No|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
There are currently no questions for this product.