Spa Bromine Granules are a highly effective sanitiser formulated to kill and prevent bacteria and algae growth in a spa.
They are a rapid dissolving and easy to vary the dose rate to suit requirements.
These granules have a fairly neutral pH so wont upset the water balance and they are also effective over a wider pH range
Ideal Bromine Range: 3 5mg/l
These bromine granules are ideal for daily dosing of your spa, to produce active bromine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH.Application Instructions
1. Maintain pH level within the ideal range of 7.2 7.6. If the not in this range,adjust.
2. Maintain bromine residuals for spas within the range 3 5mg/l (ppm. *Freshly filled new spas or spas left drained for a period of time require an initial startup dose of 50mg/l (ppm) of free chlorine circulated for a minimum of 1 hour.This product may be applied directly to spas where temperatures exceed20oC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) of clean warm water. Stir well to ensure product is fully dissolved. Add there sulting solution to the spa whilst the pump(s) are turned on.
3. Repeat dose application if necessary to achieve levels in point 2 above.
4. It is recommended that you periodically (e.g. weekly or after heavy spa use)shock dose your spa
Daily Dose Rates
Water Volumes To increase bromine Level
Litres Gallons 1mg/l 3mg/l 6mg/l
1,000 220 2g 8g 16g
1,500 330 3g 12g 24g
There are currently no questions for this product.