The Aqua-flo Circ Master CP hot tub circulation pump is a dedicated 24hr continuous duty pump.
Taking 24Hr to a new level the Circ Master CP delivers the highest GPM of any re-circulation pump on the market. A higher GPM allows the Circ Master to operate with increased heating efficiency and up to 4 times the filtration. A whisper quiet centre discharge volute design with 1.5" connections makes for easy installation and maintenance.
The Circ Master CP centre discharge wet end is less common in the UK and can be easily confused with the Circ Master Hp side discharge wet end. (See separate listing) A centre discharge wet end's dischage port sits in-line with the suction port and not off to the side.
Check your wet end as the part numbers for these pumps can sometimes be the same.
This pump is common on USA and Canadian made spas
The Circ Master HP operates standard low flow heating systems with increased reliability.
Continuous duty construction with carbon-graphite self lubricating mechanical seal and permentaly lubricated motor bearings extend motor life.
We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.
|Dimensions L x W x H||327x167x208mm|
|HEAD - H min||2.39 m|
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||0.66 A|
|Capacitor Size(s)||6 µf|
|Cord / Plug Type||3 Core AMP|
|Configuration||Center Suction, Center Discharge|
|Part No.||K55MYRPY-2111 02920006-2|
|Thread Type||Male - Buttress|
|Impeller Part No.||Y91693551|
|Impeller Vane Gap||7mm|
|Impeller Dot Colour||Red|
|Shaft Seal Type||PS-200|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
Can you supply this pump complete with unions?