The Waterway range of Executive pumps are designed especially for hot tubs and spas.
Hi-performance Waterway wet ends are driven by quality E.M.G motors that by design, dissipate heat quicker and give lower running temperatures. Two speed E.M.G motors also benefit from split start and run capacitors to make them more energy efficient.
The compact 48 frame pumps allow for installations into tight spots or in spa cabinets where space is limited and a larger 56 frame pump simply won't fit.
A 2 speed pump is commonly used as a low speed circulation pump and a hi speed booster pump.
This pump is fitted with the less common 2.5" suction, meaning a greater up take of water is drawn into the pump.
Waterway pumps are great alternatives to more expensive brands as well. Their wet end shape and dimensions mean they can replace most hot tub pumps out there from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
The Executive pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.
|Dimensions L x W x H||360x165x165mm|
|Type||2 Speed - Circ + Boost|
|HEAD - H max||21 / 3m|
|FLOW - Q max||190 / 50gpm|
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||6.8 / 2.2 A|
|Power - P1||1.48 / 0.44 kW|
|RPM||2850 / 1440|
|Capacitor Size(s)||30 / 16 µF|
|Cord / Plug Type||Bare Wire|
|Configuration||Center Suction, Side Discharge|
|Connection Diameter||79mm x 93mm|
|Thread Type||Male - Buttress|
|Impeller Part No.||310-4190|
|Impeller Vane Gap||12mm|
|Impeller Dot Colour||Blue|
|Shaft Seal Type||PS-1000|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
There are currently no questions for this product.