Waterway Executive 56 Spa Pump - 2 Speed 2.50Hp - 2.00" Suction
A 2 speed pump is commonly used as a low speed circulation pump and a hi speed booster pump.
The Waterway range of Executive 56 Frames pumps are a popular and robust spa pump that serves as a booster/jet pump for spas and swimspas.
A good fit for many of the American imported tubs such as Arctic Spas, Beechcomber, Hydraspa and more.
These pumps use hi-performance Waterway wet ends which are designed specifically for use with the 56 frame quality E.M.G motors
These larger 56 frame pumps use a robust and heavy duty motor which is one of the reasons they are favoured by Spa manufacturers.
Available as 2 x 2 (2" Suction & 2" outlet) or as 2 x 2.5 (2.5" Suction & 2"outlet)
Single speed and two speed models
The wet-end shape and dimensions mean they can replace most hot tub pumps from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
Tip: Always check you have enough space to fit one of these if you intend replacing a 48 frame pump.
Installation Notes: This pump is supplied in the standard orientation but it can be rotated if required - For further information please visit our website.
Supplied without a cable or pump unions. We recommend re-using the cable from your old pump to ensure a correct fit to your spa pack.
Electrical: A wiring diagram is usually found inside the terminal box on the top of the pump.
All electrical connections should be made by a qualified electrician.
Waterway pumps are great alternatives to more expensive brands as well. Their wet end shape and dimensions mean they can replace most hot tub pumps out there from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
|Dimensions L x W x H||430x200x240mm|
|Type||2 Speed - Circ + Boost|
|HEAD - H max||21 / 3m|
|FLOW - Q max||235 / 50lpm|
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||10.9 / 2 A|
|Power - P1||2.36 / 0.45 kW|
|RPM||2900 / 1450|
|Capacitor Size(s)||36 / 16 µf|
|Cord / Plug Type||N/A|
|Union Connection Ref||2.00 Inch|
|Configuration||Center Suction, Side Discharge|
|Thread Type||Male - Buttress|
|Impeller Part No.||310-4180|
|Impeller Vane Gap||16mm|
|Impeller Dot Colour||N/A|
|Shaft Seal Type||PS-1000|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
There are currently no questions for this product.