Waterway Viper Spa Pump - 2 Speed - 2.71 kW- 2.5" Suction
Waterway Viper pumps are a high powered pump and most commonly used for Swim spas as they benefit from having large 2.5" suction and discharge connections on the wet end.
Viper is designed for Waterway River Jet which needs hi flow and low pressure of water.
Delivered without cable, without plug
You can use your old cable to connect your new pump. If we can't connect it, choose your new cable in our cable range : Cables & Plugs
|Dimensions L x W x H||430x200x240|
|Type||2 Speed - Circ + Boost|
|HEAD - H max||8.0m|
|FLOW - Q max||1100lpm|
|Voltage / Frequency||230V / 50Hz|
|Amp Draw||12.5 / 2.50 A|
|Power - P1||2.71/ 0.55 kW|
|RPM||2850 / 1450|
|Capacitor Size(s)||30 / 16 µf|
|Cord / Plug Type||N/A|
|Union Connection Ref||2-1/2 Inch|
|Configuration||Center Suction, Side Discharge|
|Connection Diameter||93 x 93mm|
|Thread Type||Male - Buttress|
|Shaft Seal Type||PS-1000|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
There are currently no questions for this product.