The HydroAir Genesis range of blowers are easily identified by their distinctive blue casing. They are used by many hot tub manufactures but will more commonly be found as the blower of choice in many whirlpool baths out there.
The Genesis range all feature rotatable outlets making installation easy and a threaded 1.50"BSP x 32mm union is included.
A host of options and features are available throughout the range. See the specifications below.
The G50-2VH-S comes fitted with an internal PCB board allowing it to be controlled by the Genesis touch pad, giving you option to vary your bathing experience.
Blowers with integral heaters, heat the air flow and don't cool the water down as fast or feel cold on your body, giving a far more enjoyable bathing experience.
If you are planning to upgrade to a heated blower, it is recommend to check that your plumbing can cope with the additional heat generated by a heated blower. Always refer to the manufactures speifacations and guidelines.
|Old / Other Part No.||GB50-2VH-S|
|Motor Power||500 Watts|
|Voltage / Frequency||230V / 50Hz|
|Cord Length||1.0 M|
|Plug Type||Bare End|
|Varible Speed Compatible||Yes|
|Rotatable Discharge Port||Yes|
I have a Genesis air blower model GB50-2VH-S. The delayed turn off is not working following the cleaning cycle do i need a complete new blower or is there a part/circuit board that can be replaced?