The HydroAir HA440NG hot tub pumps are the ultimate benchmark in design, flexibility and performance.
We stock both single and two speed variants and the wet end has a 2" suction and 2" discharge
From small applications up to multi pump configurations to run several jetted systems the HA440NG pumps supply specific performance features and long service life.
Although labelled a 1.5Hp pump the HA440NG with is redesigned wet end and motor delivers a high flow rate exceeding 34m3/h, bettering the performance of previous 2.0Hp versions.
Replacing a pump from an old SpaForm hot tub?
If you are replacing a Spa Form pump then normally the part numbers will be 95-4409-SF for single speeds and 95-44092-SF for two speeds
Capacitors: 1023024 (2speed)
40µF; spade connectors; 108mm x 44,5mm
12,5µF; spade connectors; 82,5mm x 38mm
|Dimensions L x W x H||394x168x197mm|
|Type||2 Speed - Circ + Boost|
|HEAD - H max||11.8 / 3.8m|
|FLOW - Q max||34 / 15m³h|
|Union Connection Ref||2.00 Inch|
|Configuration||Center Suction, Side Discharge|
|Thread Type||Male - Buttress|
|Shaft Seal Type||PS-201|
|Spare Parts Available||No|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
Replaced an old model pump quite easily, no need to adjust any existing pipe work. Brilliant.
Just a quick email to say many thanks for your help, advice and a very speedy delivery - Sam
There are currently no questions for this product.