The Waterway range of Executive pumps are designed especially for hot tubs and spas.
Hi-performance Waterway wet ends are driven by quality E.M.G motors that by design, dissipate heat quicker and give lower running temperatures.
Two speed E.M.G motors also benefit from split start and run capacitors to make them more energy efficient.
The larger 56 frame pumps use a more robust heavy duty motor and are favoured by spa manufactures for this. Always check you have enough space to fit one if you intend replacing a 48 frame pump.
A 2 speed pump is commonly used as a low speed circulation pump and a hi speed booster pump.
Waterway pumps are great alternatives to more expensive brands as well. Their wet end shape and dimensions mean they can replace most hot tub pumps out there from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
The Executive pumps are supplied without a cable or unions. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack and the unions to fit this pump are Quick find code 2931, listed in the related listings.
|Dimensions L x W x H||430x200 x240mm|
|Type||2 Speed - Circ + Boost|
|MPN||PF-20-2N22X PF202N22X 3R20850-0D|
|HEAD - H max||21 / 3m|
|FLOW - Q max||208 / 50gpm|
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||90 / 1.6 A|
|Power - P1||1.50 / 0.37 kW|
|RPM||2650 / 1450|
|Capacitor Size(s)||30 / 16 µF|
|Cord / Plug Type||Bare Wire|
|Union Connection Ref||2.0 " (Inch)|
|Configuration||Center Suction, Side Discharge|
|Thread Type||Male - Buttress|
|Impeller Part No.||310-4190|
|Impeller Vane Gap||12mm|
|Impeller Dot Colour||Blue|
|Shaft Seal Type||PS-1000|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
There are currently no questions for this product.