The Waterway Hi-Flo pumps are designed especially for hot tubs and spas. Offering a larger diameter wet end the higher volume of water these pumps push through makes the 60% more efficient than the centre discharge models.
Hi-performance Waterway wet ends are driven by quality E.M.G motors that by design, dissipate heat quicker and give lower running temperatures. Two speed E.M.G motors also benefit from split start and run capacitors to make them more energy efficient.
The compact 48 frame pumps allow for installations into tight spots or in spa cabinets where space is limited and a larger 56 frame pump simply won't fit.
Waterway pumps are great alternatives to more expensive brands as well. Their wet end shape and dimensions mean they can replace most hot tub pumps out there from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
An ideal pump to replace the discontinued HydroAir Magnaflow HA440 two speed pumps 40-44092V2.
The Hi-Flo pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.
This pump will replace the smooth body version from waterway with model number SD-35-2N22CF (which uses a 3Hp Wet End) This pump uses the 4Hp Wet End. If your available space is limited and you require an exact match (smoth body version) we can supply this also. Its not listed on our website but we do normally have them in stock.
|Dimensions L x W x H||360 x175x220mm|
|Type||2 Speed - Circ + Boost|
|Power - P2||0.44 Low / 1.48 High|
|HEAD - H max||17 / 3m|
|FLOW - Q max||200 / 50gpm|
|Voltage / Frequency||220-240V / 50Hz|
|Amp Draw||6.8 / 2.2 A|
|Power - P1||2.11 / 0.68 kW|
|RPM||2850 / 1150|
|Capacitor Size(s)||30 / 16 µf|
|Cord / Plug Type||None Fitted|
|Union Connection Ref||2.00 Inch|
|Configuration||Center Suction, Side Discharge|
|Thread Type||Male - Buttress|
|Impeller Part No.||310-4050|
|Impeller Dot Colour||Blue|
|Spare Parts Available||Yes - See Spare Parts Tab|
1.5", 2.0" & 2.5" union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.
2.5" pump connections have an outside diameter of approximately 92mm.
There are currently no questions for this product.